Code Number: 3B25.10

Demo Title: Impedance Matching - Wave Machines

Area of Study: Oscillations & Acoustics

Procedure:

To show impedance just connect the section of short rods to the section of long rods. Visible reflection of a pulse will be seen when the pulse reaches the interface.

To show impedance matching, insert the short matching section between the short and long rod sections. Now when you send a pulse, there should be no reflection seen between the short and long rod sections.

Disclaimer

These demonstrations are provided only for illustrative use by persons affiliated with The University of Iowa and only under the direction of a trained instructor or physicist. The University of Iowa is not responsible for demonstrations performed by those using their own equipment or who choose to use this reference material for their own purpose. The demonstrations included here are within the public domain and can be found in materials contained in libraries, bookstores, and through electronic sources. Performing all or any portion of any of these demonstrations, with or without revisions not depicted here entails inherent risks. These risks include, without limitation, bodily injury (and possibly death), including risks to health that may be temporary or permanent and that may exacerbate a pre-existing medical condition; and property loss or damage. Anyone performing any part of these demonstrations, even with revisions, knowingly and voluntarily assumes all risks associated with them.

Instructional Resources and Lecture Demonstrations

3B25.10 - Impedance Matching - Wave Machines

Disclaimer