College of Liberal Arts & Sciences
5H40.37 - Take Apart Speaker
NOTE: A Second unit of this is located in the 3E20.XX speaker section.
Take the two assembly parts from the dissected speaker and place the coil /cone part into the magnet assembly. Connect one lead of the coil to a 6 volt battery. As you tap the other lead to the battery, you can make the coil move or even jump completely out of the magnet.
- Grant Mellor, "The Juice-Can Speaker", Flying Tinsel, 1993, p. 110-112.
- Rudolf F. Graf, "The Coil Moves", Safe and Simple Electrical Experiments, p. 96.
Disclaimer: These demonstrations are provided only for illustrative use by persons affiliated with The University of Iowa and only under the direction of a trained instructor or physicist. The University of Iowa is not responsible for demonstrations performed by those using their own equipment or who choose to use this reference material for their own purpose. The demonstrations included here are within the public domain and can be found in materials contained in libraries, bookstores, and through electronic sources. Performing all or any portion of any of these demonstrations, with or without revisions not depicted here entails inherent risks. These risks include, without limitation, bodily injury (and possibly death), including risks to health that may be temporary or permanent and that may exacerbate a pre-existing medical condition; and property loss or damage. Anyone performing any part of these demonstrations, even with revisions, knowingly and voluntarily assumes all risks associated with them.