College of Liberal Arts & Sciences
5L30.30 - Circuit Filters
Passive and Active High-Pass and Low-Pass filters are available for demonstrations as shown. You will need to connect two 9 Volt batteries to each Active filter circuit.
This circuit is used to demo Craig Kletzing's clicker question.
An RL circuit can also be used as either a high pass or a low pass filter depending on which component you take the output from. Take the output from across the resistor and you will have a low-pass filter. Take the output from across the inductor and you will have a high-pass filter. The frequency range can sweep from 0 to 13 MHz with the manual control on the wave generator. The resistor in our circuit is set from 1000 ohms. As you sweep the frequency range on the high pass filter, there will be several places in the range where the frequencies will pass freely (Around 6 MHz. and from 10 to 13 MHz).
This RL circuit is able to take enough voltage and current to light the small incandescent bulb with is placed across the inductor, making this a high-pass filter.
- Erik Zavrel, Eric Sharpsteen, "Introducing Filters and Amplifiers Using a Two-Channel Light Organ", TPT, Vol. 53, #8, Nov. 2015, p. 478.
- Yaakov Kraftmakher, "1.15 Electrical Filters", Experiments and Demonstrations in Physics, ISBN 981-256-602-3, p. 58.
Disclaimer: These demonstrations are provided only for illustrative use by persons affiliated with The University of Iowa and only under the direction of a trained instructor or physicist. The University of Iowa is not responsible for demonstrations performed by those using their own equipment or who choose to use this reference material for their own purpose. The demonstrations included here are within the public domain and can be found in materials contained in libraries, bookstores, and through electronic sources. Performing all or any portion of any of these demonstrations, with or without revisions not depicted here entails inherent risks. These risks include, without limitation, bodily injury (and possibly death), including risks to health that may be temporary or permanent and that may exacerbate a pre-existing medical condition; and property loss or damage. Anyone performing any part of these demonstrations, even with revisions, knowingly and voluntarily assumes all risks associated with them.